Add a Range of VLANs at the Device Level

---

To configure a range of VLANs that apply to a specific device only:

1. Open Devices > Devices.
2. Right-click on a specific device, and then select Configure.
   The system displays the Configure Device dialog.
   
3. In the Configure Device dialog, select the VLAN Definition tab.
   

4. Select .
   
   
   

5. For Device ID, select the device where you want to create the VLANs.
6. For VLAN Range, enter the range of VLAN IDs using a comma to separate them. You can use a dash to enter consecutive IDs such as 1-10.
7. For Name Prefix, enter a name for the prefix that all the created VLANs will use. The format is <prefix>-<vlanId>).
8. For VRF, select Default.
   The default value of the VRF field will be resolved to the default VRF for the selected device. If you select multiple devices, the default value will be Default.
   

   	NOTE:	If the selected device does not support VRFs, the VRF field does not display.

9. Select OK.