Add a Range of VLANs at the Site Level

---

To configure a range of VLANs that apply to all devices that belong to the site:

1. Open Devices > Tree View.
2. Expand World, and then select a site.
3. In the VLAN Definition window, select .
   
   
   
4. For VLAN Range, enter the range of VLAN IDs using a comma to separate them. You can use a dash to enter consecutive IDs such as 100-102.
5. For Name Prefix, enter a name for the prefix that all the created VLANs will use. The format is <prefix>-<vlanId>).
6. For VRF, select Default.
   

   	NOTE:	If the selected device does not support VRFs, the system hides the VRF field .

7. Select OK.