Load Configuration on a Discovered Device

Use this window to use a saved device configuration on a device you are adding to ExtremeCloud IQ Site Engine. Devices to which you load a saved configuration must have ZTP (Zero Touch Provisioning) enabled.

This window is accessible by selecting the Load Configuration button or by right-clicking an existing device and selecting Load Configuration on the Network > Discovered tab.

The window contains two tabs, depending on the type of configuration you are loading on the new device:

  • Clone — A configuration currently used on an existing device copied to the new device.
  • Template — A configuration saved to ExtremeCloud IQ Site Engine as a template.

Clone

Clone Example

Current Version
Displays the current version of firmware installed on the device.
Firmware
Use the drop-down list to select a new firmware version to install on the device.
Select source Device
Use the drop-down list to select a device currently added to ExtremeCloud IQ Site Engine from which to copy the device configuration.
Select configuration to clone
Use the drop-down list to select the configuration on the device listed in the Select source Device drop-down list that is being cloned to the new device.
Start
Select the Start button to copy the configuration from the selected device to the new device.
Cancel
Select the Cancel button to close the window without copying the configuration.

Template

Load a configuration on a discovered device

Current Version
Displays the current version of firmware installed on the device.
Firmware
Use the drop-down list to select a new firmware version to install on the device.
Template
Use the drop-down list to select a device configuration template saved to ExtremeCloud IQ Site Engine.
Model using Profile
Use the drop-down list to select the profile to use when modeling the template on the new device.
Start
Select the Start button to copy the configuration from the selected device to the new device.
Cancel
Select the Cancel button to close the window without copying the configuration.

Related Information

For information on related help topics:

Top