Highly Utilized Ports Report
The Highly Utilized Ports report provides detailed information about the ports for which utilization statistics are above the threshold you configure. A port is displayed in the report if the port is up and historical data collection has been enabled on the device long enough for statistic collection.
NOTE: | Use the Port Capacity Chart section of the Impact Analysis options to configure the threshold ExtremeCloud IQ Site Engine uses to determine port utilization. |
The following columns are included in the report:
- Name
- The interface name for the port.
- % Utilization
- The percentage of utilization last reported for the port.
- Default Role
- If the end-user is unauthenticated, the port implements its default role. You can select to use the current default role on the device or set a default role. If there is no default role specified, there is no role on the port.
- Alias
- Shows the alias (ifAlias) for the interface, if one is assigned.
- Stats
- Displays information about the port, if configured in PortView.
- Port Type
- The type of port. Possible values include: Access, CDP, CDP FTM 1 Backplane, FTM 1 Backplane, and Logical.
- Neighbor
- The port to which the port is connected.
- Port Speed
- The speed of the port. Possible values include: 10/100, speed in megabits per second (for example, 800.0 Mbps), Unknown (displayed for logical ports).
- PVID
- Displays the VLAN ID of the VLAN assigned to the port. When you assign a VLAN to a port, that VLAN's ID (VID) becomes the Port VLAN ID (PVID) for the port.
- VLANs
- The VLANs to which the port is associated.
- Description
- A description of the port and the device.
- Port Type Details
- Additional information about the type of port.
- Serial Number
- The serial number of the device.
For information on related help topics: